ElecPow - Telemetry

Data gathered using ElecPow 1.x or ElecPow 2.x. Recording can be activated on the tabs „Today“, „History“ or „Readings“.

New data is added to the statistics every 5 minutes. „Max.power“ is the peak active power and „Energy“ is the accumulated energy in the period shown. The other measured values are the current or last recorded ones.

Daily statistics

◀ ▶

Power Voltage Temperature Dew point Air humidity Air pressure

Past 7 days

Monthly statistics

◀ ▶

Energy Max.Power Run time

As a heatmap

Yearly statistics

The diagrams can be customized by passing parameters to the URL:

• w=WIDTH (in pixels)
• h=HEIGHT (in pixels)
• b=THEME (0: transparent light, 1: white background, 2: transparent dark, 3: black background)
• t=START_TIME (format YYYYMMDD or e.g. „today“, „this_week_monday“, „last_week_monday“, „january_1“)
• u=END_TIME (format YYYYMMDD or e.g. „now“, „tomorrow“, „next_week_monday“, „midnight_first_day_of_next_month“)
• d=DURATION (in days; use this instead of either t or u)
• s=SOURCE (p: active power, P: peak active power, e: energy, r: run time, v: voltage, c: current, a: apparent power, q: reactive power, f: power factor; can be used in combination; the first value is shown as chart, the other ones are displayed as text only)
• l=LANGUAGE (en: English, de: German)
• r=ROTATE (0: not rotated, 1: rotate left, 2: upside down, 3: rotate right)
• f=FACTOR (upscale image for high-resolution displays)
• min=POSITION (shows the minimum value of the current view; 0: not shown, 1: left, 2: right)
• max=POSITION (shows the maximum value of the current view; 3: left and right)
• cur=POSITION (shows the value at the edge of the current view; 7: left, right and as an extra large font in the background)

To be used as e.g. signatures in discussion forums.

https://www.coolhardware.de/telemetrypow.png?x=&t=today&h=120&w=400
https://www.coolhardware.de/telemetrypow.png?x=&s=eP&d=28&h=120&w=400
https://www.coolhardware.de/telemetrypow.png?x=&t=jan1&u=next_year_jan1&s=eP&h=120&w=400

Data export in CSV format is possible via this URL:

https://www.coolhardware.de/telemetrypow.csv?x=

As with the generation of the diagrams, parameters for start and end time can be specified (see Configuration).